
Epoxy flooring
Solid epoxy flooring in San Diego
High-gloss or textured solid-color epoxy for hangars, shops, warehouses, showrooms and offices.

Solid epoxy systems
Solid color epoxy for almost any environment
Solid epoxy flooring systems can be installed with a high-gloss finish or mixed with aggregate for added texture and durability. They are made of 100% solids epoxy, and the build is matched to the needs of the space.
Solid epoxy is common in garages and large interior spaces such as factories and warehouses. It installs quickly and gives a hard, abrasion-resistant surface with good chemical resistance.
Service at a glance
- Finish
- High-gloss, or mixed with aggregate for a textured finish
- Common uses
- Garages and large interior spaces such as factories and warehouses
- Good to know
- Installs quickly and gives a hard, abrasion-resistant surface
- Service family
- Epoxy Flooring
Finish options
High gloss or textured?
Solid epoxy comes in two basic finishes. A smooth, high-gloss surface is bright and the easiest to clean; adding aggregate gives texture for better footing where floors get wet or see work traffic.
Smooth, high-gloss finish
A seamless, reflective surface in a single color. It brightens a space and is the easiest finish to keep clean, which suits showrooms, offices, laboratories and garages.
- A choice of solid colors
- Line striping and color coding for aisles and work areas
- Logos and graphics in commercial spaces
Textured finish with aggregate
Aggregate mixed into or broadcast over the epoxy adds texture, traction and durability. A skid-resistant additive can also be added to the topcoat where the floor may get wet.
A textured surface takes a little more effort to clean than a smooth one, so the amount of texture is matched to the area.
Where it works
Good uses for solid epoxy flooring
- Airplane hangar floors
- Shop floors
- Warehouse floors
- Car dealership floors
- Manufacturing floors
- Laboratory floors
- Retail floors
- Office floors
- Garages
Compare systems
How solid epoxy compares with other systems
Solid epoxy is the straightforward, single-color option in the epoxy family. Other systems add decorative effects, heavier-duty resistance or faster installation, so the choice depends on the space.
| System | What it is | Usually chosen for | Compared with solid epoxy |
|---|---|---|---|
| Solid epoxy | 100% solids epoxy in a single color, smooth or textured | Garages, shops, warehouses, labs, showrooms and offices | The baseline: hard, abrasion-resistant and quick to install |
| Epoxy chip | Epoxy layers with vinyl flakes and a protective topcoat | Garages, shops, retail showrooms, schools and restaurants | A textured, terrazzo-like look that hides imperfections in the slab |
| Epoxy quartz | Epoxy layers with colored quartz aggregate | Commercial kitchens, restrooms, locker rooms, stairs and exterior walkways | Wear and abrasion resistance with a textured, decorative quartz finish |
| Metallic epoxy | Clear epoxy with metallic pigments | Showrooms, lobbies, restaurants and homes | A decorative finish with flowing color and movement instead of a single color |
| Urethane cement | A three-component polyurethane-concrete mortar | Food processing, commercial kitchens, cold storage and heavy industry | Chosen where heat, temperature changes, hot oils or chemicals are part of daily use |
| Polyurea polyaspartic | A flexible, fast-installing coating | Garages, driveways, showrooms and warehouses | Installs faster than epoxy, which helps when downtime is tight |
Not sure which system fits? See the epoxy flooring overview, or tell us how the space is used and we will recommend options.
Before installation
Is your concrete ready for solid epoxy?
Epoxy is applied on top of the concrete, so the result depends on the slab underneath. These checks come before any coating goes down.
What is checked
- Whether the concrete has been sealed: epoxy will not bond to sealed concrete, and water beading on the surface is a sign of a sealer
- Whether new concrete has fully cured
- Cracks, holes, patches and joints that need repair
- Moisture in the slab, and the flatness and slope of the floor
How the surface is prepared
The concrete is prepared mechanically, usually by grinding, so the coating can bond. Repairs are made, then a primer or base coat seals the pores before the solid color is applied.
See concrete grinding and our process.
Our work
Solid-color floors
Open larger photo: Bright white coated floor in an empty room
Open larger photo: White coated floor in a long corridor
Open larger photo: Light coated floor in a long corridor
Open larger photo: Glossy gray floor in a warehouse with a mezzanine stair
Photos from Concrete Polishing Solutions projects. Select a photo to view it larger.
View the photo galleryFAQ
Solid epoxy questions
What does “100% solids” epoxy mean?
Epoxy floor coatings come in three types: 100% solids, water-based and solvent-based. 100% solids epoxy is a durable option and is the type professionals use and recommend, and it is what our solid epoxy systems are made of.
Is solid epoxy slippery?
A smooth, high-gloss epoxy can be slippery when wet. Where that matters, aggregate can be mixed into the system or a skid-resistant additive added to the topcoat to improve traction.
Can solid epoxy be used outdoors?
Solid epoxy is mainly an interior floor. Epoxy can turn yellow in sunlight, so outdoor areas such as walkways and pool decks usually get a system suited to exterior use, such as epoxy quartz.
Solid epoxy or polished concrete for a warehouse?
Both are used on warehouse floors. Polished concrete avoids a coating that can wear in the busiest forklift lanes, while solid epoxy adds color, a coated surface and line striping. The choice is made area by area after evaluating the floor and how it is used.
How is a worn solid epoxy floor refreshed?
Small chips and worn spots can usually be repaired by recoating the damaged area with a compatible material. Regular sweeping helps prevent wear, because grit acts like sandpaper on the topcoat. See the floor care guide.
Related
Related services
- Metallic Epoxy FlooringClear epoxy with metallic pigments for a decorative finish with flowing color and movement.
- Epoxy Chip FlooringLayered epoxy with vinyl flakes for a decorative, chemical-resistant finish that is easy to clean.
- Urethane CementPolyurethane-concrete mortar for heavy-duty, chemical and thermal-shock environments.
- ManufacturingFloors for manufacturing facilities.
Areas served
Serving homes and businesses across Southern California
- San Diego County
- Orange County
- Riverside County
- Los Angeles County
Free estimate
Ready to transform your concrete floor?
Share a few details about your space and the finish you have in mind, and we will help you choose the right system for your home or business.
- (619) 870-8308Call for a free estimate
- info@concretepolishingsolutions.proEmail us about your project
- Southern CaliforniaSan Diego, Orange, Riverside & Los Angeles counties