▷3 Cleaning And Maintenance Guidelines For All Concrete Types In San Diego
3 Cleaning And Maintenance Guidelines For All Concrete Types In San Diego
There are many different types of concrete sealants, each with particular advantages and uses. No matter what kind of concrete coating your floors have, you can easily maintain and take care of them by following the recommendations below:
Polished Concrete Flooring Upkeep
If your floor is polished concrete, keep the surface always free of dust. If there is a spill, clean up the dirt and debris as quickly as you can without using bleach or cleaners with citrus bases on polished concrete surfaces. To protect the polished appearance, protective padding should also be positioned beneath furniture legs. A microfiber mop is the best cleaning tool for this kind of surface. Heavy soiled areas will require localized cleaning before the entire polished concrete surface is cleaned. Rinse with fresh water after using a cleanser with a low pH balance.
Grind And Seal Your Floors
The “grind and seal” technique for concrete involves a transparent coating step. These floor coatings normally require 5-7 days to fully cure. Keep in mind to always keep this type of flooring clean and vacuumed. To prevent damage, place padding underneath the furniture. A microfiber mop and a low-pH cleaner should be used for cleaning. In order to maintain surfaces in areas with high traffic, think about applying fresh surface coatings every five years.
Upkeep For Polywood Floors
Epoxy-coated concrete floors are durable and resistant to chemicals. Like spills on other types of concrete, this surface needs to be cleaned up quickly away after any spills. Before cleaning the entire epoxy surface, localized cleaning can be helpful for large spills. To clean a specific area, apply a gentle, ph-neutral cleaning solution made especially for floor maintenance. You can apply the floor cleaning solution by mopping the surface with clean, warm water. Regardless of the situation, always rinse your concrete surface with clean water after use. We suggest reapplying the epoxy every 10 years or so, depending on usage.
How Often Should Concrete Be Cleaned?
For concrete surfaces with little traffic, power washing might only be necessary once every two years or so. The majority of experts suggest washing your concrete at least once a year, just to be safe.
What Is The Procedure For Cleaning Concrete?
Concrete outside is most usually cleaned with a power washer, which is frequently rented (such as to remove oil and grease stains). Usually, it works best to spray a detergent or alkaline degreaser on the surface, wait 15 to 20 minutes, and then rinse with water.
How Is New Concrete Protected?
To sustain concrete saturation for the first 28 days is the goal, in a nutshell. For the first seven days after installation, sprinkle the slab with water five to ten times each day, or as frequently as you can. The curing process begins as soon as the concrete is poured.
Call (619) 870-8308 to speak with the professionals at Concrete Polishing Solutions and take advantage of our first-rate services now!
Our Complete Services
- Acrylic Flooring
- Metallic Epoxy Flooring
- Epoxy Chip Flooring
- Epoxy Quartz Flooring
- Solid Epoxy Flooring
- Urethane Cement
- Polyurea Polyaspartic
- Control Joint Caulking
- Elastomeric Wall Coatings
- Expansion Joint Caulking
- Silicone Caulking
- Urethane Caulking
- Wet Glazing
- Auto Dealerships
- Corporate Offices
- Parking Structures
- Retail Stores
- Sports Facilities